How to Flash Santin Actoma Ace with a New Stock ROM: A Step-by-Step Guide
If you’re looking to revive or upgrade your Santin Actoma Ace smartphone, flashing it with a new stock ROM is a great solution. This process can help fix software issues, remove bloatware, or restore your device to its original state. Below, we’ll walk you through the process in a simple,
Step 1: Prepare the Firmware
- Download the official stock ROM for your Santin Actoma Ace from Here.
- Unzip or extract the firmware files into a dedicated folder on your computer. Ensure all files are intact and accessible.
Step 2: Install ADB Drivers
- ADB (Android Debug Bridge) drivers are essential for flashing. If you don’t have them installed, download the latest ADB drivers from Here.
- Install the drivers on your computer to enable seamless communication between your phone and PC.
Step 3: Enable Fastboot Mode on Your Device
- Power off your Santin Actoma Ace completely.
- Press and hold the Volume Down + Power Button simultaneously to boot the device into Fastboot Mode.
- Once in Fastboot Mode, your phone will be ready to connect to your computer.
Step 4: Connect Your Phone to the PC
- Use a USB cable to connect your Santin Actoma Ace to your computer.
- Ensure that your PC recognizes the device. If not, you may need to install the necessary USB drivers for your phone.
Step 5: Run the Flash.bat File
- Navigate to the folder where you extracted the firmware files.
- Locate and double-click the flash.bat file to begin the flashing process.
- The command prompt window will open, and the flashing process will start automatically.
Step 6: Wait for the Process to Complete
- Do not disconnect your phone during the flashing process.
- Once the flashing is complete, the command prompt window will close automatically.
- Your Santin Actoma Ace will reboot into the new stock ROM.
Tips for a Successful Flashing Process
- Backup Your Data: Flashing will erase all data on your device, so make sure to back up important files beforehand.
- Use a Reliable USB Cable: A faulty cable can interrupt the process, so use a high-quality USB cable.
- Ensure Sufficient Battery: Make sure your phone has at least 50% battery to avoid interruptions during flashing.
By following these steps, you can easily flash your Santin Actoma Ace with a new stock ROM and enjoy a fresh, optimized experience. If you encounter any issues, feel free to reach out for assistance!